60" Commercial Electric Flat Top Griddle/Grill Keating 60FLD 208/240V 3Ph
The Keating MIRACLEAN®Griddle is designed to provide maximum performance with many benefits to the operator. The mirror surface is achieved in a special eight step process. Insulated stainless steel electric elements are mounted every 12" to ensure performance and recovery allowing the operator to use zone cooking for different products.
Saves on energy costs
Documented energy savings of 32% by Pacific Gas & Electric means dollar savings of up to $400 per year in energy costs on a 36" model. The
MIRACLEAN®surface also reduces radiated heat loss to less than 10% of a conventional steel plate griddle. By keeping heat on the surface and out of the kitchen, the MIRACLEAN®Griddle reduces air conditioning demands and gives the chef a cooler cooking environment.
Reduces flavor transfer The smooth MIRACLEAN® surface prevents food particles from being trapped as they are in steel plate griddles. The surface virtually eliminates flavor transfer.
Saves 44% in clean up
A documented study by the University of Illinois General Engineering department confirmed what has long been know by MIRACLEAN®operators - cleaning the MIRACLEAN saves time! 44% savings means less labor cost and high productivity. Cleaning a 36" MIRACLEAN versus a conventional steel plate model 3x daily would mean savings of $2,600 over the life of the unit. Cleaning the surface takes 3 easy steps: 1. scrape with the Keating scraper 2. wash with a Keating palmetto brush and water 3. polish with Keating Klenzer and a damp cloth No more griddle bricks, grill screens or harsh chemicals needed, and reseasoning the plate is not necessary.
Accurate temperature control
MIRACLEAN®Griddles feature zoned temperature control to ensure temperature accuracy in cooking. The MIRACLEAN surface allows the operator to cook at lower temperatures to control the degree of carmelization and product shrinkage.
Griddle Plate - High carbon, 3/4" steel plate with our patented Trivalent Chromium surface applied in a special 8-step process to ensure a mirror smooth surface. The MIRACLEAN®plate has an emissivity rating of .078.
Drain Trough: A 3" wide drain trough is on the left side, and the front drain trough is 2" wide (FT models have a front trough only), with a 4" x 1 1/2" drain in the left front. It is located above a large stainless steel grease drawer with baffles and a rear handle. The perimeter and grease trough are 14 gauge stainless steel. The perimeter is 4 1/2" high across the back with sides angling from 4 1/2" in the rear to 1/2" at the front. Sides and rear perimeter have an exterior trim of 22 gauge stainless steel.
Electric Elements: One stainless steel element for every 12" of linear plate surface. Each element is encased in insulation and held tightly in place with a molded steel cover. High input elements are available.
Cabinet: The cabinet has an inner liner made of 20 gauge aluminized steel. The outer cabinet has 14 gauge stainless steel sides, an 18 gauge stainless steel back and 16 gauge aluminized steel bottom.
Thermostat: Close range, hydraulic type thermostat, accurate to ±5° from 250° to 550°F. Application of this thermostat is patented by Keating.
Electric Specifications: 3 wire terminal block with ground for field wiring. (See local codes for supply line requirements.)
Dimensions: Total Outer Dimensions: 60"W x 30.5"D x 38.5"H Add 8" for removable cutting board. Add 2" to back of unit for cord.