Product Description
With the NXS-NMS NetModule Shell (FG2009-10), one NetLinx Control Card can be installed, providing connectivity to the NetLinx bus via ICSNet connections. The NXS-NMS is a simple, economical option for integrating additional functionality into control systems, and it provides an enclosure for installing NetLinx (NXC) Control Cards.Â
Features
Control connector: 20-pin black (male) connector that connects the NetModule Shell to external devices. These connectors are keyed to ensure proper installation
ICSNet RJ-45 connectors: Receives power and data from a NetLinx Master/Hub ICSNet Port. An ICSNet port on a NetLinx Master or Hub supplies up to 500 mA at 12 V for module power
12 VDC power supply connectors: Two male 2-pin (green) connectors for 12 VDC power Netlinks Power Supply
PSN6.5 Specifications:
Dimensions (HWD): 1.50’ x 5.55" x 9.25" (3.81 cm x 14.10 cm x 23.50 cm)
Weight: 2.76 lbs. (1.25 kg) (without power cord).
Input Voltage: 90-132 VAC, 2.6A, 47~63 Hz, 180-264 VAC, 1.3A, 47~63 Hz
Output Voltage: 13.5 VDC 6.5A
Output Current: 6.5 A (continuous power output is 90 W max).
Ripple and Noise: 350 mV peak-to-peak @ 70% load.
Protection: Over-voltage, over-current, short-circuit, transient and thermal. Switching regulated, overload protected.
PWR Indicator: Green LED indicates presence of DC on the output.
Connectors: Three removable 2-pin 3.5 mm mini-Phoenix connectors
Rear Panel Components:
Three 12 VDC power supply connectors.
Standard IEC (male) jack for the power cord.
Input Power Cord: 6-foot (1.83 m) IEC power cord terminated with a grounded Edison plug for AC input (U.S. only).
Enclosure: Metal with black matte finish.
Temperature Range: 32°F - 122°F (0°C - 50°C)
Certification:
UL: US listed - Class 1 Power Supply
CSA approved
CE approved
