Product Description
JoeTap Nitro Cold Brew Coffee Tap System High-Capacity JT-HC-1-2
New. Never used. There are some minor scuffs to the top of the unit. The front still has the plastic on the outer surfaces.Â
Each JoeTapâ„¢ dispenser is shipped as a complete system. It requires only cold brew coffee, electricity and a supply of nitrogen gas (N2). NOTE: You will need a wrench to tighten the nut on the gas supply and a flathead screwdriver to adjust the pressure on the regulator. The cold brew coffee should be filtered down to 5 microns or less and chilled between 34 to 38 degrees F. To chill the cold brew, place it in the 5 gallon stainless beverage tank (provided with your unit), then place the tank inside the operating JoeTapâ„¢ dispenser. Alternatively, you may pre-make and pre-chill the cold brew in a separate container in a refrigerator or cold storage walk-in. The JoeTap does not include a gas source. You will need to obtain nitrogen (N2) from a vendor who supplies beverage-grade compressed gas. A metallic off-taste or other undesirable flavors may develop from poor quality gas! You may also get your nitrogen from a nitrogen generator such as the Nitrogenatorâ„¢ Elite available from AC Beverage.
What is Included:Â
When you unpack your JoeTapâ„¢, you should have the following components: • JoeTap High Capacity Unit. Each unit is a stand alone, self contained, refrigerated unit with patent pending JoeTap technology:Â
Single Door Refrigeration Unit: • JT-HC-1-2: JoeTap dual faucet, single tower system (1 nitro/1 standard faucet)Â
• Two 5 gallon beverage tanks. These tanks have lids that are released and secured with handles. The lids have rubber gaskets which allow for a proper seal when filled with cold brew coffee and gas. These tanks are also equipped with safety release rings that must be used anytime you are opening a tank that has been charged with gas.Â
• 25 JoeTap cleaning solution packets. You cannot use ANY other cleaning product and should not use any other cleaning product to clean the JoeTap and/or beverage tanks. The product inside the packets is hazardous if not handled properly. Please read cleaning instruction thoroughly before opening or handling. For additional cleaning packets, contact JoeTap.Â
• Gas regulator. The gas regulator included ONLY works with nitrogen (N2) gas tanks. You will need a wrench to tighten the nut when attaching to N2 tank and a flat head screwdriver to adjust the pressure on the regulator.Â
• Additional items include: Drip tray for each faucet and food grade lubricant (for lubricating O-rings weekly).
Exterior Dimensions: 36"L x 24.75"D x 34.56"H without casters
Weight:320lbs